-->

Example: I have about 50GB of music, 15GB of movies, and 10GB of iPhoto pictures on my MBP. I could easily move all 75GB to an external drive because I always have my iPhone with me. That might be more convenient than installing apps on an external drive. Emacs-mac-app (26.3) – the Mitsuharu Yamamoto mac port Some of these ports do not add an emacs binary to your PATH, which is necessary for Doom’s installation process. You’ll have to do so yourself by adding this to your shell config.

This setting controls whether users can give that consent to apps that use OpenID Connect and OAuth 2.0 for sign-in and requests to access data. An app can be created from within your own organization, or it can come from another Office 365 organization or a third-party.

The Network Path is the Mac's IP address followed by the name of the shared folder on your Mac. To find your Mac's IP address, click the Apple icon, click System Preferences, and then click Network. The IP address displays next to Status. 1) Make sure the USB flash drive is connected to your Mac. 2) Click on the Windows Start button and select File Explorer. 3) In the File Explorer sidebar, select the USB flash drive, it will probably have a D or E drive letter assigned to it. 5) Run the Setup app inside the Boot Camp folder.

If you turn this setting on, those apps will ask users for permission to access your organization’s data, and users can choose whether to allow it. If you turn this setting off, then admins must consent to those apps before users may use them. In this case, consider setting up an admin consent workflow in the Azure portal so users can send a request for admin approval to use any blocked app.

A user can give access only to apps they own that access their Office 365 information. They can't give an app access to any other user's information.

Turning user consent on or off

Allowing Mac 10.14.5 To Install External App Computer

Here's how to turn User consent to apps on or off.

App
  1. In the admin center, go to the Settings > Org settings > Services page, and then select User consent to apps.

  2. On the User consent to apps page, select the option to turn user consent on or off.

More info

To learn about how to configure your consent settings in Azure active directory, read Configure the admin consent workflow.

To learn about managing user consent to apps, read Managing consent to applications and evaluating consent requests.

Classic Mac Pro 5,1 (or simply cMP, also 4,1 upgraded to 5,1) is now considered by Apple as vintage. It’s pretty disappointing considering how capable and upgradable these machines still are. Installing Windows is no longer officially supported, but it’s completely possible though not quite easy.

Another challenge is that macOS Mojave 10.14 now implies using Metal-capable GPU while most of them are not able to display Apple boot menu (which you normally see holding the Option key) required to boot into Windows. Basicaly your screenremains black until macOS is loaded. Well, some EFI bootable cards that support boot menu exist but they are released almost 10 years ago and are really outdated. What is more, none of them supports displaying of boot menu with 4k 60hz monitor connected.

This guide is for those who want macOS Mojave + Windows 10 + modern GPU (in our case Sapphire Radeon Pulse RX 580 8GB).

Updated 28 May 2019

Installing Windows 10 in 5 steps

It’s supposed that you have the latest Boot ROM version 144.0.0.0.0. If not, please update first.

Step 1: Use separate drive for Windows

Boot Camp Assistant no longer supports cMP and doesn’t allow creating a separate partition for Windows.Windows has to be installed on a separate drive, which is good actually to avoid messing with partitions in future.

We recommend using the internal SATA II connector in one of four drive bays or alternatively one of two SATA II connectors in the optical drive area. Using the HP 654540-001 3.5” → 2.5” adapter (7$) to place 2.5” SSD in a drive bay can be quite convenient.

Of cause, SATA II (up to 300MB/s) is a bottleneck for modern 2.5” SSDs (up to 550 MB/s where SATA III is preferable) but real life experience shows that the difference is hardly noticable unless you deal with lots of big files (e.g. >1GB where sequential read/write speeds matter) on your system drive.

We didn’t test using PCIe → SATA III adapter or PCIe → NVMe adapter for Windows partition. Many people reported it was not possible in their case. If you successfully did it please let us know in the comments below or via e-mail.

Step 2: Create a bootable Windows 10 DVD disk

Warning: DO NOT install Windows from a USB flash drive. It has been discovered that Windows when installed in EFI mode is corrupting the Mac Pro’s firmware by signing it with multiple Secure Boot (X.509) certificates. Also, you wouldn’t be able to boot into Windows after selecting its drive as bootable in macOS Preferences → Startup disk. Therefore Windows should only be installed in Legacy BIOS mode from an optical drive.

Make sure that your Windows 10 ISO file fits on the DVD disk, in our case we had to burn Windows 10 1803 ISO (64-bit) to a single-layer DVD+R disc 4.7GB.

Burning a DVD disk under macOS can be done with the following Terminal command:

On Windows we recommend using the free ImgBurn app.

Step 3: Boot from your Windows 10 DVD disk

Turn on your mac while holding the “C” key to boot from the optical disk (if you have PCIe drives installed and can’t boot from the disc, remove those PCIe adapters).Proceed with installation normally until you see the “Where do you want to install Windows” drive selection screen.

Allowing Mac 10.14.5 To Install External App Password

External

Step 4: Format the target drive

Press Shift+F10 to launch command prompt. Type the following commands:

Now make sure to select the correct target drive number N (NOT your macOS disk), after that type:

You should now see your drive as Unallocated space.

Press the “New” button to create necessary partitions. There should be only two partitions (for legacy installation, EFI mode creates four) automatically created:

Select the newly created partition 2 and continue with installation normally. Your mac will be rebooted twice.Every reboot do not forget entering the boot menu (by holding the Option key) and selecting ‘Windows’ boot drive there. When finished, boot into Windows.

Allowing Mac 10.14.5 To Install External App Store

Step 5: Install Windows drivers and Boot Camp utility

Windows 10 installs all necessary drivers automatically except Bluetooth and internal speaker. These need to be installed from the original Boot Camp package for MacPro5,1.Download and install 7zip, download Brigadier 0.2.4 app, open Windows command prompt where Brigadier is located and type:

When finished, it will create a folder BootCamp-031-11269, you need to install these for Bluetooth and internal speaker correspondingly, make sure you run the command prompt as administrator:

Now we need newer BootCamp drivers intended for iMacPro1,1:

When finished, it will create a folder BootCamp-041-55643, you need to run this command:

Allowing Mac 10.14.5 To Install External App Software

When finished, reboot. We also recommend running Apple Software Update to update Wifi drivers:

You probably don’t want to forget installing our awesome Macs Fan Control app, do you? :)

Switching between macOS Mojave & Windows

When you’re in macOS, use Preferences → Startup disk to select a boot drive:

When you’re in Windows, use the Boot Camp Control Panel from your Windows tray to select a boot drive:

This guide is based on this MacRumors thread. Special thanks to h9826790 for sharing his useful experience. Any comments are welcome.